- True Megohmmeter
- Test voltage combinations 250, 500 and 1000V
- Insulation measurements to 2000MΩ
- Automatic test inhibition if >25V
- Automatic discharge for operator safety
- Resistance measurements to 400kΩ
- Continuity measurements with 200mA test current
- Alarm indication
- Timer function for easy DAR and PI measurements
- Over-molded slip-proof holster for rugged field use
- Supplied with a soft carrying case
- Cable testing (including telecom)
- Motor winding testing
- Continuity testing
- AC & DC voltage testing
- Resistance measurements
AEMC 1045-KIT 1000V Analog/Digital Megohmmeter/ Insulation Resistance Tester Kit is a battery powered digital insulation resistance tester. It is designed to measure insulation resistance, continuity, voltage and to measure resistance. The AEMC 1045-KIT 1000V Analog/Digital Megohmmeter/ Insulation Resistance Tester Kit tests are 250, 500 and 1000V. In incorporates a 600V voltmeter which automatically detects and accurately displays AC/DC voltages in the test circuit on each of the insulation test voltage ranges. Above 25V is also provides and audible and visual signal, and inhibits further tests, thus protecting the user and the meter.
An exceptionally large digital/analog multi-function display provides clear and easy readings enhanced by a bright blue electroluminescent backlight. The Model 1045 incorporates a timer function which allows the user to operate the unit hands free for the duration of the test or until the button is pressed again. The megohmmeter will beep automatically at 30sec, 60sec and 10 minutes to remind the user to record measurements.
The AEMC 1045-KIT 1000V Analog/Digital Megohmmeter/ Insulation Resistance Tester Kit includes a model 1045 megohmmeter, field case, two color-coded leads, black test probe, two alligator clips, remote test probe, batteries and user manual. The Remote Test Probe (with target light) is used for all measurements. The yellow button on the probe button is used the same way as the button on the instruments. The test voltage is generated when the button is pushed.
|2118.98||AEMC 2118.98 Field case, waterproof, for models 1030-1045||
|2118.99||AEMC 2118.99 Hands free carrying case for models 1030-1045||
|Data Sheet:||(935 KB)|