<< AEMC Simple Loggers
|
AEMC L702 Simple Logger II Temperature/Relative Humidity Data Logger
|
| |

AEMC L702 Shown
|
|
|
- Two input channels
- Integral Temperature Humidity sensor
- Programmable storage rates from once every 5 seconds to 1
every day
- Stores up to 240,000 measurements in non-volatile memory
- 3 user selectable storage modes
- Powered by standard Alkaline batteries
- Lightweight, compact, fits anywhere
- 5 LED indicators quickly and clearly display logger status
- Includes DataView® software for data storage, real-time
waveform display, analysis and report generation
USB cable
and batteries included
- EN 61010-1; 50V CAT III
|
| |
The AEMC Model L702 Simple Logger II
Temperature/Relative Humidity Data Logger is a two channel
Temperature/Humidity recording device powered by alkaline batteries. It is
capable of measuring temperatures from 14 to 122°F (-10 to 50°C) and 5 to
85% RH with resolutions of 0.1 degree and 0.1% RH.
The AEMC L702
stores measurements at user programmable rates of once every 5 seconds to 1
every day. Up to 240,000 measurements can be stored for a period of 45 days
or more.
The AEMC L-702 incorporates a unique capacitive sensor
element for measuring relative humidity while temperature is measured by a
band-gap sensor. CMOSens technology guarantees excellent reliability and
long term stability with high accuracy.
Analog information on the
input is sampled and converted to a digital signal with up to 14 bit
resolution. An optically isolated Universal Serial Bus (USB) port provides
for the transfer of data from the instrument’s internal memory to the
computer for analysis.
One of the main advantages of the logger is its ability to perform a
variety of recording tasks with easy and intuitive setup from a computer
using DataView software. DataView is included with the AEMC L 702 and
provides real time display of measurements, data analysis and report
generation.
|
| |
|
Specifications |
| Electrical |
| Channels |
Two |
| Input |
Temperature Sensor |
Humidity Sensor |
| Range |
14° to 122°F (-10° to 50°C) |
5 to 85% RH |
| Accuracy |
±(1% of Reading + 1°F/C) |
±(3% of Reading + 2cts) |
| Resolution |
0.1°F/C |
0.1% RH |
| Sample Rate |
Minimum of once every 5 seconds |
| Storage Rate |
Programmable from once every 5s
to once per day |
| Storage Technique |
Start/Stop, FIFO and Extended
Recording Mode (XRMTM) |
| Recording Length |
15 minutes to 8 weeks,
programmable using DataView |
| Memory |
240,000 measurements (512KB)
Recorded data is stored in non-volatile memory and retained even
if battery is low or removed. |
| Communication |
USB 2.0 optically isolated |
| Power Source |
2x1.5V AA-cell alkaline batteries |
| Battery Life |
100 hours to >45 days (dependent
on storage rate/recording length) |
|
|
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| L702 |
AEMC L702 Simple Logger II Temperature/Relative Humidity Data Logger |
 |
$399.00 |
| Included Accessories |
| |
- 1 - Batteries
- 1 - DataView software
- 1 - Real-time Waveform Display
- 1 - Analysis and report Generation
- 1 - USB Cable
- 1 - Instruction Manual
|
Included |
|