|
AEMC MN01 AC Current Probes |
| Small and compact, the AC Current Probe Model MN01 is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications.
If there is a current in the conductor clamped, the Model MN01 is protected against overvoltages during disconnection from the measurement instrument |
AEMC MN01 Shown
|
| MN01 |
AEMC MN01 AC Current Probe (150A, 1mA/A, Lead)
|
 |
$79.00 |
|
|
AEMC MN02 AC Current Probes |
-
Small, compact size
-
Measurement ranges of 50mA to 100A (1Ω load) 50mA to 90A (10Ω load)
-
Jaw opening accommodates conductors up to 0.39" diameter
-
Designed for DMMs, loggers, recorders and oscilloscope
-
48 to 10,000Hz frequency range
-
1mA/A from 1Ω to 10Ω output signals
-
Designed to EN61326-1, 300V CAT IV, 600V CAT III safety standard
-
Double Insulation
-
CE Mark
The MN02 is a small, compact AC current probe. The probe has a
measurement range up to 100Arms which makes it a perfect tool for
measurement with DMMs and recorders. The Model MN02 is compatible
with any AC ammeter, multimeter, or other current measurement
instrument with an input impedance lower than 10Ω. To achieve the
stated accuracy, use the probe with an ammeter having an accuracy of
0.75% or better. |
AEMC MN02 Shown
|
| MN02 |
AEMC MN02 AC Current Probe (100A, 1mA/A, Lead, 1% Accuracy)
|
|
$109.00 |
|
|
AEMC MN03 AC Current Probes |
| Small and compact, the AC Current Probe
Model MN05 is the ideal complement for any multimeter to measure AC
currents in low-power secondary or industrial applications. When used with an AC voltmeter, it allows
you to directly read the current measured on the voltmeter |
AEMC MN03 Shown
|
| MN03 |
AEMC MN03 AC Current Probe (100A, 1mV/A, Lead)
|
|
$89.00 |
|
|
AEMC MN05 AC Current Probes |
| Small and compact, the AC Current Probe
Model MN05 is the ideal complement for any multimeter to measure AC
currents in low-power secondary or industrial applications. With its
two ranges, it offers excellent resolution for measuring AC intensities
from 5mA to 100A. |
AEMC MN05 Shown
|
| MN05 |
AEMC MN05 AC Current Probe (100A-1mV/A, 10A-1V/A, Lead) |
|
$99.00 |
|
|
AEMC MN185 AC Current Probes |
|
The MN185 is a high accuracy mini probe for measurements to 150AAC. This
probe uses a special magnetic core to provide higher accuracy and lower
phase shift. The MN185 provides an output signal of 1mAAC/AAC. The
output termination are standard 4mm banana jacks. |
AEMC MN185 Shown
|
| MN185 |
AEMC MN185 AC Current Probe Model MN185 (Jack - 1mA/A - 100A max) (#100.185) |
|
$129.00 |
|
|
| |
|
AEMC MN103 AC Current Probes
|
-
Small, compact and very tough
-
"Clothes pin" shape makes them ideal for use in tight
areas, such as breaker panels, controller panels, or outlets
-
Excellent companion to DMMs Permits very low AC
current measurements
The MN103 measures leakage current and low currents from
1mA, and measures current on 5A secondaries. Provides AC current
measuring capabilities to instruments with mV inputs. The output of the
MN103 is a 5ft lead with safety 4mm safety plug. |
AEMC MN103 Shown
|
| MN103 |
AEMC MN103 AC Current Probe Model MN103 (Lead - 1mV/mA - 10A max & 1mV/A - 100A max) (#1031.02) |
|
$184.00 |
|
|
| |
|
AEMC MN106 AC Current Probes
|
|
The MN106 is a general purpose mini probe for tight areas such as crowded
wiring. It extends DMM AC measurements to 150AAC. The output of the
MN106 is a 5ft lead with safety 4mm banana plug. |
AEMC MN106 Shown
|
| MN106 |
AEMC MN106 AC Current Probe Model MN106 (Lead - 1mA/A - 150A max) (#1031.17) |
|
$159.00 |
|
|
| |
|
AEMC MN114 AC Current Probes
|
|
The MN114 is a general purpose mini probe which offers 1mA to
10AAC, continuous cycle current range. The output signal is 100mVAC/AAC (1V at
10A). It was designed to optimize measurements on 5A signals. The output
termination is a 5ft lead with safety 4mm banana plug.
|
AEMC MN114 Shown
|
| MN114 |
AEMC MN114 AC Current Probe (Lead - 100mV/A-10A max) (#2110.71) |
|
$184.00 |
|
|
AEMC MN193 AC Current Probes |
|
Set of three color-coded MN193 (6A/120A) probes for use with AEMC® Power Quality Instruments |
AEMC MN193 Shown
|
| MN193 |
AEMC MN193 Set of (3) color-coded MN193 (5A/100A AC) Probes for use with AEMC Power Quality Instruments (#2140.14) |
|
$714.00 |
|
|
AEMC MN193-BK AC Current Probes |
|
AC Current
Probe Model MN193-BK (5A/100A) for use with Models 8220, 8230 &
3945/3945-B |
AEMC MN193-BK Shown
|
| MN193BK |
AEMC MN193-BK, AC Current Probe Model MN193-BK (5A/100A) for use with Models 8220, 8230 & 3945 |
|
$254.00 |
|
PDF Help