AEMC Catalog | AEMC Price List

<< AEMC AC Current Probes

AEMC SR600 Series
AC Current Probes

AEMC SR600 AC Current Probes

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

The SR600 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per Amp measured in the jaw. The SR600 has jack output termination that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

AEMC SR600 Shown
 

Product Information
Datasheet	88 KB
PDF Help

AEMC SR601 AC Current Probes

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

The SR601 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per Amp measured in the jaw. The SR601 has jack output termination that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

AEMC SR601 Shown
 

Product Information
Datasheet	93 KB
PDF Help

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

The SR604 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per Amp measured in the jaw. The SR604 has an integral 5ft (1.5m) lead terminated shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

AEMC SR604 Shown
 

Product Information
Datasheet	103 KB
PDF Help

AEMC SR651 AC Current Probes

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

The SR651 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional to the rate of 1mV per Amp to the current measured in the jaw. The SR651 has jack output terminations that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift are important.

AEMC SR651 Shown
 

Product Information
Datasheet	102 KB
PDF Help

AEMC SR652 AC Current Probes

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

The SR652 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional to the rate of 1mV per Amp to the current measured in the jaw. The SR652 has an integral 5ft (1.5m) lead terminated by shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift are important.

AEMC SR652 Shown
 

Product Information
Datasheet	110 KB
PDF Help

AEMC SR631 AC Current Probes

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

The SR631 is a general purpose 1000AAC current probe designed for use with instruments that require a 5A current input. It has a 1000:5 ration and output of 5mA per Amp measured in the jaw. The SR631 has jack output termination that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

AEMC SR631 Shown
 

Product Information
Datasheet	107 KB
PDF Help

AEMC SR634 AC Current Probes

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

The SR634 is a general purpose 1000AAC current probe designed for use with instruments that require a 5A current input. It has a 1000:5 ration and output of 5mA per Amp measured in the jaw. The SR634 has jack output termination that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

AEMC SR634 Shown
 

Product Information
Datasheet	98 KB
PDF Help

AEMC SR632 AC Current Probes

• Large jaw opening accommodated conductors up to two 500MCM
• Improved ergonomic design and easy operation
• Conforms to IEC1010, 600V, Cat. III
• Low phase shift for power measurement
• Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

    The SR632 is a general purpose 1000AAC current probe designed for use with instruments that require a 5A current input. It has a 1000:5 ration and output of 5mA per Amp measured in the jaw. The SR632 has an integral 5ft (1.5m) lead terminated by shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

AEMC SR632 Shown
 

Product Information
Datasheet	108 KB
PDF Help