| AEMC AmpFlex™is a flexible AC current probe composed of a flexible sensor
and an electronic module. The flexible sensor permits measurements on
conductors where standard clamp-on probes cannot be used. In particular,
it can be installed in tight spaces, around cable bundles, around wide
or large bus bars, or even wrapped around irregular shapes. The Shape
Memory feature enables the user to pre-shape the sensor before inserting
it between or around conductors. This feature facilitates positioning
the sensor around the conductor, enhances user safety, and alleviates
the drooping effect associated with other flexible sensors. The AmpFlex™is
lightweight and does not use magnetic cores like standard transformers.
The transformation principle is based on an air core. It presents
virtually no load to the system under test, has a low phase shift and
excellent frequency response, and cannot be damaged by current
over-loads. The sensor assembly is water-proof and insulated for 1000V
working voltage. The AmpFlex™meets EN 61010and is CE marked. The AmpFlex™has
a mV output proportional to the current measured for direct readings on
DMMs, loggers, oscilloscopes and power or harmonic meters. The length of
the flexible sensor can be selected from 24" (450mm) to
60"(1520mm).Longer lengths are available. |
)
